Skin exam

Follow below steps to perform the exam:

1. Connect the dermhood module.
2. Click “START” – the recording will start automatically.
3. Place the module on the skin and scan the whole affected area.
4. When done click on “STOP” or wait for the recording to finish automatically after 20 seconds.

Remember about below hints:

• Move the dermhood over the skin to capture the lesion and surrounding area.
• If there is more than one place you want to record, record them all during one exam, there is 20 seconds of recording.

Avoid the most common mistakes:

• Not touching the skin with the dermhood.
• Not moving the device during the scan.

See examples of correctly performed exam:

See examples of incorrectly performed exam:

The reasons for incorrectly performed examinations might be as follow:

• not touching the skin with the module but recording the skin from a distance

Version: 1.0